Singer 5050C Sewing Machine Parts

Singer 5050C 3 Pin Dome Shaped Foot Pedal With Fitted Lead

Dome foot pedal with 3-pin lead, ready to run the machine.

Singer 5050C Replacement YDK Foot Control Pedal

Foot control to start, stop and vary sewing speed.

Singer 5050C Feed Darning Cover Plate

For free-motion embroidery, quilting or darning work.

Singer 5050C Tension Unit Check Spring

Spare part for this sewing machine.

Singer 5050C 10 Plastic Drop in Bobbins

Pack of 10 drop-in bobbins for machines that take this style.

Singer 10 Metal Drop in Bobbins

Pack of 10 metal drop-in bobbins for machines that take this style.

Singer 5050C Apollo Bobbin Case

Holds the bobbin and controls lower-thread tension.

Apollo Bobbin Case & 3 Bobbins

Singer 5050C 2 Pkts Organ Needles Size 80/12 + 10 Bobbins

Organ size 80/12 needles plus a pack of 10 bobbins for everyday sewing.

Singer 5050C Walking Foot & Guide & Instructions

Feeds thick layers evenly so seams stay matched. Guide and instructions included.

Singer 5050C 2 Packets of 10 Organ Assorted Needles

Two packs of Organ needles in mixed sizes for everyday sewing.

Singer 5050C Straight Stitch Foot

Gives a clean, even straight stitch for seams and topstitching.

Singer 5050C Zig Zag Presser Foot

Everyday foot for zig zag stitching and light decorative work.

Singer 5050C Adjustable Invisible Zip Foot

Sews concealed zips close to the teeth for a tidy finish.

Singer 5050C Adjustable Zip / Zipper Foot

Sews standard zips and edged trims right beside the teeth.

Singer 5050C Hinged Teflon Zip Zipper Foot

Non-stick zip foot that slides over leather, vinyl and sticky fabrics.

Singer 5050C Straight Stitch Teflon Foot

Non-stick foot for straight stitching on leather, vinyl and coated cloth.

Singer 5050C Non-Stick Zig Zag Teflon Foot

Non-stick zig zag foot for leather, vinyl and other sticky fabrics.

Singer 5050C Adjustable Sequins Ribbon Foot

Guides sequins, ribbon or braid so you can sew them on neatly.

Singer 5050C Free Hand Embroidery / Darning Foot

For free-motion embroidery and darning with the feed dogs lowered.

Singer 5050C Free Motion Embroidery / Quilting Foot

Large opening for free-motion embroidery, quilting and creative work.

Singer 5050C Free Motion Quilting Foot - Open Toe

Open front gives a clear view while free-motion quilting.

Singer 5050C Darning Foot

Free-motion foot for darning holes and mending worn areas.

Singer 5050C Ruler Foot

Runs against quilting rulers for smooth, guided free-motion lines.

Singer 5050C Fringe Tailor Tacking Foot

Forms fringe loops and tailor tacks for marking or trim.

Singer 5050C Roller Foot

Rolls over leather, vinyl and other fabrics that stick or drag.

Singer 5050C 3 Strand Multi Cording Foot

Holds up to three cords for neat decorative cording.

Singer 5050C Adjustable Blind Stitch Foot

Sews almost invisible hems on skirts, trousers and curtains.

Singer 5050C Bias Tape Binding Foot

Feeds bias tape so you can bind raw edges in one pass.

Singer 5050C Gathering Foot

Gathers fabric as you sew — ideal for ruffles and fullness.

Singer 5050C Bias Binder Binding Foot

Folds bias binding and stitches it onto the fabric edge.

Singer 5050C Shirring Foot

Makes even shirring and soft elasticated gathers.

Singer 5050C 5 Groove Pintuck Foot

Twin-needle pintucks with five grooves for neat spacing.

Singer 5050C 9 Groove Pintuck Foot

Twin-needle pintucks with nine grooves for finer spacing.

Singer 5050C 1/4 Inch Plastic Quilting Foot & Guide

Keeps a steady 1/4" seam for patchwork. Guide included.

Singer 5050C 1/4 Inch Metal Quilting Foot & Guide

Metal 1/4" foot with guide for accurate patchwork seams.

Singer 5050C Applique Foot

Clear view for applique work and satin-stitch edges.

Singer 5050C Button Hole Foot

Helps you sew neat, evenly sized buttonholes.

Singer 5050C Button Sew On Foot

Holds the button steady while you stitch it in place.

Singer 5050C Open Toe Buttonhole Foot

Open toe for a clear view when placing buttonholes.

Singer 5050C Slide Buttonhole Foot

Sliding foot for measured buttonholes of a consistent length.

Singer 5050C Open Toe Embroidery Foot

Open front so you can see clearly while embroidering.

Singer 5050C Knit Foot

Helps feed stretch and knit fabrics with less puckering.

Singer 5050C Overcast Edging Foot

Neatens raw edges with an overcast stitch to reduce fraying.

Singer 5050C 1/8 Rolled Hem Foot

Rolls a narrow 1/8" hem on light fabrics such as chiffon.

Singer 5050C 6mm Rolled Hem Foot

Rolls a 6mm hem on light to medium-weight fabrics.

Singer 5050C Multicord Foot 5 Hole

Guides up to five cords for decorative multi-cord stitching.

Singer 5050C 6mm Felling Foot

Forms neat flat-fell seams about 6mm wide.

Singer 5050C Edge / Joining Stitch In A Ditch Foot

Joins fabric edges or stitches neatly in the ditch for binding and quilting.

Singer 5050C 3 Mixed Piping Feet - 1x 1/8 inch - 1x 1/4 inch - 1x 3/8 inch

Three piping feet covering 1/8", 1/4" and 3/8" cord sizes.

Singer 5050C 1/4 Inch Groove Piping Foot

Sews piping with 1/4" cord close and even along the edge.

Singer 5050C 3/8 Inch Groove Piping Foot

Sews piping with 3/8" cord close and even along the edge.

Singer 5050C 1/8 Inch Groove Piping Foot

Sews fine piping with 1/8" cord for delicate edges.

Singer 5050C 3/16 Inch Groove Piping Foot

Sews piping with 3/16" cord close and even along the edge.

Singer 5050C Clear View 3/16 Inch Piping Foot

Clear foot for 3/16" piping so you can see the cord as you sew.

Singer 5050C Double Groove 1/4 Inch Piping Foot

Double groove for 1/4" piping and twin-cord decorative work.

Singer 5050C Oil 1 Ounce Bottle

Clean sewing-machine oil for regular lubrication and quieter running.