Singer 4826C Sewing Machine Parts

Singer 4826C 3 Pin Dome Shaped Foot Pedal With Fitted Lead

Dome foot pedal with 3-pin lead, ready to run the machine.

Singer 4826C Replacement YDK Foot Control Pedal

Foot control to start, stop and vary sewing speed.

Singer 4826C Feed Darning Cover Plate

For free-motion embroidery, quilting or darning work.

Singer 4826C Tension Unit Check Spring

Spare part for this sewing machine.

Singer 4826C 10 Plastic Drop in Bobbins

Pack of 10 drop-in bobbins for machines that take this style.

Singer 10 Metal Drop in Bobbins

Pack of 10 metal drop-in bobbins for machines that take this style.

Singer 4826C Apollo Bobbin Case

Holds the bobbin and controls lower-thread tension.

Apollo Bobbin Case & 3 Bobbins

Singer 4826C 2 Pkts Organ Needles Size 80/12 + 10 Bobbins

Organ size 80/12 needles plus a pack of 10 bobbins for everyday sewing.

Singer 4826C Walking Foot & Guide & Instructions

Feeds thick layers evenly so seams stay matched. Guide and instructions included.

Singer 4826C 2 Packets of 10 Organ Assorted Needles

Two packs of Organ needles in mixed sizes for everyday sewing.

Singer 4826C Straight Stitch Foot

Gives a clean, even straight stitch for seams and topstitching.

Singer 4826C Zig Zag Presser Foot

Everyday foot for zig zag stitching and light decorative work.

Singer 4826C Adjustable Invisible Zip Foot

Sews concealed zips close to the teeth for a tidy finish.

Singer 4826C Adjustable Zip / Zipper Foot

Sews standard zips and edged trims right beside the teeth.

Singer 4826C Hinged Teflon Zip Zipper Foot

Non-stick zip foot that slides over leather, vinyl and sticky fabrics.

Singer 4826C Straight Stitch Teflon Foot

Non-stick foot for straight stitching on leather, vinyl and coated cloth.

Singer 4826C Non-Stick Zig Zag Teflon Foot

Non-stick zig zag foot for leather, vinyl and other sticky fabrics.

Singer 4826C Adjustable Sequins Ribbon Foot

Guides sequins, ribbon or braid so you can sew them on neatly.

Singer 4826C Free Hand Embroidery / Darning Foot

For free-motion embroidery and darning with the feed dogs lowered.

Singer 4826C Free Motion Embroidery / Quilting Foot

Large opening for free-motion embroidery, quilting and creative work.

Singer 4826C Free Motion Quilting Foot - Open Toe

Open front gives a clear view while free-motion quilting.

Singer 4826C Darning Foot

Free-motion foot for darning holes and mending worn areas.

Singer 4826C Ruler Foot

Runs against quilting rulers for smooth, guided free-motion lines.

Singer 4826C Fringe Tailor Tacking Foot

Forms fringe loops and tailor tacks for marking or trim.

Singer 4826C Roller Foot

Rolls over leather, vinyl and other fabrics that stick or drag.

Singer 4826C 3 Strand Multi Cording Foot

Holds up to three cords for neat decorative cording.

Singer 4826C Adjustable Blind Stitch Foot

Sews almost invisible hems on skirts, trousers and curtains.

Singer 4826C Bias Tape Binding Foot

Feeds bias tape so you can bind raw edges in one pass.

Singer 4826C Gathering Foot

Gathers fabric as you sew — ideal for ruffles and fullness.

Singer 4826C Bias Binder Binding Foot

Folds bias binding and stitches it onto the fabric edge.

Singer 4826C Shirring Foot

Makes even shirring and soft elasticated gathers.

Singer 4826C 5 Groove Pintuck Foot

Twin-needle pintucks with five grooves for neat spacing.

Singer 4826C 9 Groove Pintuck Foot

Twin-needle pintucks with nine grooves for finer spacing.

Singer 4826C 1/4 Inch Plastic Quilting Foot & Guide

Keeps a steady 1/4" seam for patchwork. Guide included.

Singer 4826C 1/4 Inch Metal Quilting Foot & Guide

Metal 1/4" foot with guide for accurate patchwork seams.

Singer 4826C Applique Foot

Clear view for applique work and satin-stitch edges.

Singer 4826C Button Hole Foot

Helps you sew neat, evenly sized buttonholes.

Singer 4826C Button Sew On Foot

Holds the button steady while you stitch it in place.

Singer 4826C Open Toe Buttonhole Foot

Open toe for a clear view when placing buttonholes.

Singer 4826C Slide Buttonhole Foot

Sliding foot for measured buttonholes of a consistent length.

Singer 4826C Open Toe Embroidery Foot

Open front so you can see clearly while embroidering.

Singer 4826C Knit Foot

Helps feed stretch and knit fabrics with less puckering.

Singer 4826C Overcast Edging Foot

Neatens raw edges with an overcast stitch to reduce fraying.

Singer 4826C 1/8 Rolled Hem Foot

Rolls a narrow 1/8" hem on light fabrics such as chiffon.

Singer 4826C 6mm Rolled Hem Foot

Rolls a 6mm hem on light to medium-weight fabrics.

Singer 4826C Multicord Foot 5 Hole

Guides up to five cords for decorative multi-cord stitching.

Singer 4826C 6mm Felling Foot

Forms neat flat-fell seams about 6mm wide.

Singer 4826C Edge / Joining Stitch In A Ditch Foot

Joins fabric edges or stitches neatly in the ditch for binding and quilting.

Singer 4826C 3 Mixed Piping Feet - 1x 1/8 inch - 1x 1/4 inch - 1x 3/8 inch

Three piping feet covering 1/8", 1/4" and 3/8" cord sizes.

Singer 4826C 1/4 Inch Groove Piping Foot

Sews piping with 1/4" cord close and even along the edge.

Singer 4826C 3/8 Inch Groove Piping Foot

Sews piping with 3/8" cord close and even along the edge.

Singer 4826C 1/8 Inch Groove Piping Foot

Sews fine piping with 1/8" cord for delicate edges.

Singer 4826C 3/16 Inch Groove Piping Foot

Sews piping with 3/16" cord close and even along the edge.

Singer 4826C Clear View 3/16 Inch Piping Foot

Clear foot for 3/16" piping so you can see the cord as you sew.

Singer 4826C Double Groove 1/4 Inch Piping Foot

Double groove for 1/4" piping and twin-cord decorative work.

Singer 4826C Oil 1 Ounce Bottle

Clean sewing-machine oil for regular lubrication and quieter running.