Brother XL 2600 Sewing Machine Parts
New parts for your machine below. Choose a foot, belt, bobbin or needle, then check out with PayPal or card.
Brother XL 2600 Foot Pedal With Fitted Lead
Foot control with lead fitted, ready to run the machine.
Brother XL 2600 Replacement YDK Foot Control Pedal
Foot control to start, stop and vary sewing speed.
Brother XL 2600 Bobbin Cover Window Plate part no XC8983021
Covers the bobbin area while you sew.
Brother XL 2600 Needle Clamp part no XC2427051
Replacement bulb to light the sewing area.
Brother XL 2600 10 Plastic Bobbins
Spare part for this sewing machine.
10 Metal Metal Bobbins x 10
Pack of 10 sturdy metal bobbins, ready to wind and sew.
Brother XL 2600 2 Packets of 10 Organ Assorted Needles
Two packs of Organ needles in mixed sizes for everyday sewing.
Brother XL 2600 Walking Foot & Guide & Instructions
Feeds thick layers evenly so seams stay matched. Guide and instructions included.
Brother XL 2600 Ruffler Foot & Instructions
Creates neat gathers and pleats in one pass. Instructions included.
Brother XL 2600 Shank For Clip On Feet
Spare part for this sewing machine.
Brother XL 2600 Straight Stitch Foot
Gives a clean, even straight stitch for seams and topstitching.
Brother XL 2600 Zig Zag Presser Foot
Everyday foot for zig zag stitching and light decorative work.
Brother XL 2600 Clear View Invisible Zip Zipper Foot
Sews concealed zips close to the teeth for a tidy finish.
Brother XL 2600 Clip On Metal Invisible Zip Zipper Foot
Sews concealed zips close to the teeth for a tidy finish.
Brother XL 2600 Zip Zipper Foot
Sews zips and edged trims right beside the teeth.
Brother XL 2600 Narrow Zipper Foot
Sews zips and edged trims right beside the teeth.
Brother XL 2600 Zig Zag Teflon Foot
Non-stick foot for leather, vinyl and coated fabrics.
Brother XL 2600 Clip On Roller Foot
Rolls over leather, vinyl and other fabrics that stick or drag.
Brother XL 2600 Darning Foot
Free-motion foot for darning holes and mending worn areas.
Brother XL 2600 Free Hand Embroidery / Darning Foot
For free-motion embroidery and darning with the feed dogs lowered.
Brother XL 2600 Free Motion Embroidery / Quilting Foot
Large opening for free-motion embroidery, quilting and creative work.
Brother XL 2600 Free Motion Quilting Foot - Open Toe
Open front gives a clear view while free-motion quilting.
Brother XL 2600 Clip On Overcast Edging & Overlocking Foot
Neatens raw edges with an overcast stitch to reduce fraying.
Brother XL 2600 Stitch In A Ditch Foot
Presser foot attachment for this sewing machine.
Brother XL 2600 Clip On Adjustable Blind Hemmer Stitch Foot
Presser foot attachment for this sewing machine.
Brother XL 2600 1/4 Inch Groove Piping Foot
Sews piping with 1/4" cord close and even along the edge.
Brother XL 2600 3/8 Inch Groove Piping Foot
Sews piping with 3/8" cord close and even along the edge.
Brother XL 2600 1/8 Inch Groove Piping Foot
Sews fine piping with 1/8" cord for delicate edges.
Brother XL 2600 3/16 Inch Groove Piping Foot
Sews piping with 3/16" cord close and even along the edge.
Brother XL 2600 Clear View 3/16 Inch Piping Foot
Clear foot for 3/16" piping so you can see the cord as you sew.
Brother XL 2600 Clip On Double Groove 1/4 Inch Piping Foot
Sews piping cord close and even along the fabric edge.
Brother XL 2600 1/4 Inch Patchwork Foot & Guide
Presser foot attachment for this sewing machine.
Brother XL 2600 Metal 1/4 Inch Patchwork Quilting Foot & Guide
Keeps an accurate seam for patchwork and quilting.
Brother XL 2600 Adjustable Bias Tape Binding Foot
Helps bind or finish raw edges with tape or binding.
Brother XL 2600 Clip On Button Hole Foot
Helps you sew neat, evenly sized buttonholes.
Brother XL 2600 Button Sew On Foot
Holds the button steady while you stitch it in place.
Brother XL 2600 Slide Buttonhole Foot
Sliding foot for measured buttonholes of a consistent length.
Brother XL 2600 Knit Foot
Helps feed stretch and knit fabrics with less puckering.
Brother XL 2600 Binder Foot
Helps bind or finish raw edges with tape or binding.
Brother XL 2600 6mm Felling Foot
Forms neat flat-fell seams about 6mm wide.
Brother XL 2600 Rolled 1-8 inch Hemmer Foot
Presser foot attachment for this sewing machine.
Brother XL 2600 Cording Foot
Guides cord for neat decorative stitching.
Brother XL 2600 Multi Cord Foot 5 Hole
Guides cord for neat decorative stitching.
Brother XL 2600 9 Groove Pintuck Foot
Twin-needle pintucks with nine grooves for finer spacing.
Brother XL 2600 5 Groove Pintuck Foot
Twin-needle pintucks with five grooves for neat spacing.
Brother XL 2600 Parallel Zig Zag Presser Foot
Everyday foot for zig zag stitching and light decorative work.
Brother XL 2600 Gathering Foot
Gathers fabric as you sew — ideal for ruffles and fullness.
Brother XL 2600 Satin Stitch Foot
Presser foot attachment for this sewing machine.
Brother XL 2600 Clip On Quilters 1/4 Inch Piecing Foot
Presser foot attachment for this sewing machine.
Brother XL 2600 Shirring Foot
Makes even shirring and soft elasticated gathers.
Brother XL 2600 Adjustable Ruler Guide Foot
Runs against quilting rulers for guided free-motion lines.
Brother XL 2600 Stitch Guide Foot
Presser foot attachment for this sewing machine.
Brother XL 2600 Large Opening Foot 7mm
Presser foot attachment for this sewing machine.
Brother XL 2600 Open Toe Embroidery Foot
Open front so you can see clearly while embroidering.
Brother XL 2600 Sequins Foot
Guides sequins, ribbon or braid so you can sew them on neatly.
Brother XL 2600 Fringe Foot
Forms fringe loops and tailor tacks for marking or trim.
Brother XL 2600 Beading Foot
Presser foot attachment for this sewing machine.
Brother XL 2600 4 x Red Sewing Machine Spool Pin Felts
Replacement red felts for spool pins on many Singer and other machines.