Janome Harmony 2041 Sewing Machine Parts
New parts for your machine below. Choose a foot, belt, bobbin or needle, then check out with PayPal or card.
Janome Harmony 2041 Foot Pedal With Fitted Lead
Foot control with lead fitted, ready to run the machine.
Janome Harmony 2041 10 Plastic Bobbins
Spare part for this sewing machine.
Janome Harmony 2041 Metal Bobbins x 10
Pack of 10 sturdy metal bobbins, ready to wind and sew.
Janome Harmony 2041 2 Packets of 10 Organ Assorted Needles
Two packs of Organ needles in mixed sizes for everyday sewing.
Janome Harmony 2041 Bobbin Case
Holds the bobbin and controls lower-thread tension.
Janome Harmony 2041 Shuttle Hook
Replacement hook that forms the lockstitch with the bobbin thread.
Janome Harmony 2041 Walking Foot & Guide & Instructions
Feeds thick layers evenly so seams stay matched. Guide and instructions included.
Janome Harmony 2041 Ruffler Foot & Instructions
Creates neat gathers and pleats in one pass. Instructions included.
Janome Harmony 2041 Shank For Clip On Feet
Spare part for this sewing machine.
Janome Harmony 2041 Straight Stitch Foot
Gives a clean, even straight stitch for seams and topstitching.
Janome Harmony 2041 Zig Zag Presser Foot
Everyday foot for zig zag stitching and light decorative work.
Janome Harmony 2041 Clear View Invisible Zip Zipper Foot
Sews concealed zips close to the teeth for a tidy finish.
Janome Harmony 2041 Clip On Metal Invisible Zip Zipper Foot
Sews concealed zips close to the teeth for a tidy finish.
Janome Harmony 2041 Zip Zipper Foot
Sews zips and edged trims right beside the teeth.
Janome Harmony 2041 Narrow Zipper Foot
Sews zips and edged trims right beside the teeth.
Janome Harmony 2041 Zig Zag Teflon Foot
Non-stick foot for leather, vinyl and coated fabrics.
Janome Harmony 2041 Clip On Roller Foot
Rolls over leather, vinyl and other fabrics that stick or drag.
Janome Harmony 2041 Darning Foot
Free-motion foot for darning holes and mending worn areas.
Janome Harmony 2041 Free Hand Embroidery / Darning Foot
For free-motion embroidery and darning with the feed dogs lowered.
Janome Harmony 2041 Free Motion Embroidery / Quilting Foot
Large opening for free-motion embroidery, quilting and creative work.
Janome Harmony 2041 Free Motion Quilting Foot - Open Toe
Open front gives a clear view while free-motion quilting.
Janome Harmony 2041 Clip On Overcast Edging & Overlocking Foot
Neatens raw edges with an overcast stitch to reduce fraying.
Janome Harmony 2041 Stitch In A Ditch Foot
Presser foot attachment for this sewing machine.
Janome Harmony 2041 Clip On Adjustable Blind Hemmer Stitch Foot
Presser foot attachment for this sewing machine.
Janome Harmony 2041 1/4 Inch Groove Piping Foot
Sews piping with 1/4" cord close and even along the edge.
Janome Harmony 2041 3/8 Inch Groove Piping Foot
Sews piping with 3/8" cord close and even along the edge.
Janome Harmony 2041 1/8 Inch Groove Piping Foot
Sews fine piping with 1/8" cord for delicate edges.
Janome Harmony 2041 3/16 Inch Groove Piping Foot
Sews piping with 3/16" cord close and even along the edge.
Janome Harmony 2041 Clear View 3/16 Inch Piping Foot
Clear foot for 3/16" piping so you can see the cord as you sew.
Janome Harmony 2041 Clip On Double Groove 1/4 Inch Piping Foot
Sews piping cord close and even along the fabric edge.
Janome Harmony 2041 1/4 Inch Patchwork Foot & Guide
Presser foot attachment for this sewing machine.
Janome Harmony 2041 Metal 1/4 Inch Patchwork Quilting Foot & Guide
Keeps an accurate seam for patchwork and quilting.
Janome Harmony 2041 Adjustable Bias Tape Binding Foot
Helps bind or finish raw edges with tape or binding.
Janome Harmony 2041 Clip On Button Hole Foot
Helps you sew neat, evenly sized buttonholes.
Janome Harmony 2041 Button Sew On Foot
Holds the button steady while you stitch it in place.
Janome Harmony 2041 Slide Buttonhole Foot
Sliding foot for measured buttonholes of a consistent length.
Janome Harmony 2041 Knit Foot
Helps feed stretch and knit fabrics with less puckering.
Janome Harmony 2041 Binder Foot
Helps bind or finish raw edges with tape or binding.
Janome Harmony 2041 6mm Felling Foot
Forms neat flat-fell seams about 6mm wide.
Janome Harmony 2041 Rolled 1-8 inch Hemmer Foot
Presser foot attachment for this sewing machine.
Janome Harmony 2041 Cording Foot
Guides cord for neat decorative stitching.
Janome Harmony 2041 Multi Cord Foot 5 Hole
Guides cord for neat decorative stitching.
Janome Harmony 2041 9 Groove Pintuck Foot
Twin-needle pintucks with nine grooves for finer spacing.
Janome Harmony 2041 5 Groove Pintuck Foot
Twin-needle pintucks with five grooves for neat spacing.
Janome Harmony 2041 Parallel Zig Zag Presser Foot
Everyday foot for zig zag stitching and light decorative work.
Janome Harmony 2041 Gathering Foot
Gathers fabric as you sew — ideal for ruffles and fullness.
Janome Harmony 2041 Satin Stitch Foot
Presser foot attachment for this sewing machine.
Janome Harmony 2041 Clip On Quilters 1/4 Inch Piecing Foot
Presser foot attachment for this sewing machine.
Janome Harmony 2041 Shirring Foot
Makes even shirring and soft elasticated gathers.
Janome Harmony 2041 Adjustable Ruler Guide Foot
Runs against quilting rulers for guided free-motion lines.
Janome Harmony 2041 Stitch Guide Foot
Presser foot attachment for this sewing machine.
Janome Harmony 2041 Large Opening Foot 7mm
Presser foot attachment for this sewing machine.
Janome Harmony 2041 Open Toe Embroidery Foot
Open front so you can see clearly while embroidering.
Janome Harmony 2041 Sequins Foot
Guides sequins, ribbon or braid so you can sew them on neatly.
Janome Harmony 2041 Fringe Foot
Forms fringe loops and tailor tacks for marking or trim.
Janome Harmony 2041 Beading Foot
Presser foot attachment for this sewing machine.