Brother XL 3001 Sewing Machine Parts
New parts for your machine below. Choose a foot, belt, bobbin or needle, then check out with PayPal or card.
Pay with PayPal or card
Brother XL 3001 Replacement YDK Foot Control Pedal
Foot control to start, stop and vary sewing speed.
Brother XL 3001 Bobbin Case
Holds the bobbin and controls lower-thread tension.
Brother XL 3001 Metal Bobbins x 10
Pack of 10 sturdy metal bobbins, ready to wind and sew.
Brother XL 3001 2 Packets of 10 Organ Assorted Needles
Two packs of Organ needles in mixed sizes for everyday sewing.
Brother XL 3001 Walking Foot & Guide & Instructions
Feeds thick layers evenly so seams stay matched. Guide and instructions included.
Brother XL 3001 Zig Zag Presser Foot
Everyday foot for zig zag stitching and light decorative work.
Brother XL 3001 Straight Stitch Foot
Gives a clean, even straight stitch for seams and topstitching.
Brother XL 3001 Adjustable Invisible Zip Foot
Sews concealed zips close to the teeth for a tidy finish.
Brother XL 3001 Adjustable Zip / Zipper Foot
Sews standard zips and edged trims right beside the teeth.
Brother XL 3001 Hinged Teflon Zip Zipper Foot
Non-stick zip foot that slides over leather, vinyl and sticky fabrics.
Brother XL 3001 Roller Foot
Rolls over leather, vinyl and other fabrics that stick or drag.
Brother XL 3001 Straight Stitch Teflon Foot
Non-stick foot for straight stitching on leather, vinyl and coated cloth.
Brother XL 3001 Non-Stick Zig Zag Teflon Foot
Non-stick zig zag foot for leather, vinyl and other sticky fabrics.
Brother XL 3001 Darning Foot
Free-motion foot for darning holes and mending worn areas.
Brother XL 3001 Free Hand Embroidery / Darning Foot
For free-motion embroidery and darning with the feed dogs lowered.
Brother XL 3001 Free Motion Embroidery / Quilting Foot
Large opening for free-motion embroidery, quilting and creative work.
Brother XL 3001 Free Motion Quilting Foot - Open Toe
Open front gives a clear view while free-motion quilting.
Brother XL 3001 Adjustable Blind Stitch Foot
Sews almost invisible hems on skirts, trousers and curtains.
Brother XL 3001 3 Mixed Piping Feet - 1x 1/8 inch - 1x 1/4 inch - 1x 3/8 inch
Three piping feet covering 1/8", 1/4" and 3/8" cord sizes.
Brother XL 3001 1/8 Inch Groove Piping Foot
Sews fine piping with 1/8" cord for delicate edges.
Brother XL 3001 3/16 Inch Groove Piping Foot
Sews piping with 3/16" cord close and even along the edge.
Brother XL 3001 1/4 Inch Groove Piping Foot
Sews piping with 1/4" cord close and even along the edge.
Brother XL 3001 3/8 Inch Groove Piping Foot
Sews piping with 3/8" cord close and even along the edge.
Brother XL 3001 Clear View 3/16 Inch Piping Foot
Clear foot for 3/16" piping so you can see the cord as you sew.
Brother XL 3001 Double Groove 1/4 Inch Piping Foot
Double groove for 1/4" piping and twin-cord decorative work.
Brother XL 3001 Ruffler Foot & Instructions
Creates neat gathers and pleats in one pass. Instructions included.
Brother XL 3001 1/4 Inch Plastic Quilting Foot & Guide
Keeps a steady 1/4" seam for patchwork. Guide included.
Brother XL 3001 1/4 Inch Metal Quilting Foot & Guide
Metal 1/4" foot with guide for accurate patchwork seams.
Brother XL 3001 Slide Buttonhole Foot
Sliding foot for measured buttonholes of a consistent length.
Brother XL 3001 Button Hole Foot
Helps you sew neat, evenly sized buttonholes.
Brother XL 3001 Open Toe Buttonhole Foot
Open toe for a clear view when placing buttonholes.
Brother XL 3001 Button Sew On Foot
Holds the button steady while you stitch it in place.
Brother XL 3001 Bias Tape Binding Foot
Feeds bias tape so you can bind raw edges in one pass.
Brother XL 3001 Bias Binder Binding Foot
Folds bias binding and stitches it onto the fabric edge.
Brother XL 3001 1/8 Rolled Hem Foot
Rolls a narrow 1/8" hem on light fabrics such as chiffon.
Brother XL 3001 6mm Rolled Hem Foot
Rolls a 6mm hem on light to medium-weight fabrics.
Brother XL 3001 Knit Foot
Helps feed stretch and knit fabrics with less puckering.
Brother XL 3001 6mm Felling Foot
Forms neat flat-fell seams about 6mm wide.
Brother XL 3001 Adjustable Sequins Ribbon Foot
Guides sequins, ribbon or braid so you can sew them on neatly.
Brother XL 3001 Fringe Tailor Tacking Foot
Forms fringe loops and tailor tacks for marking or trim.
Brother XL 3001 Gathering Foot
Gathers fabric as you sew — ideal for ruffles and fullness.
Brother XL 3001 Shirring Foot
Makes even shirring and soft elasticated gathers.
Brother XL 3001 5 Groove Pintuck Foot
Twin-needle pintucks with five grooves for neat spacing.
Brother XL 3001 9 Groove Pintuck Foot
Twin-needle pintucks with nine grooves for finer spacing.
Brother XL 3001 Applique Foot
Clear view for applique work and satin-stitch edges.
Brother XL 3001 Open Toe Embroidery Foot
Open front so you can see clearly while embroidering.
Brother XL 3001 Overcast Edging Foot
Neatens raw edges with an overcast stitch to reduce fraying.
Brother XL 3001 Edge / Joining Stitch In A Ditch Foot
Joins fabric edges or stitches neatly in the ditch for binding and quilting.
Brother XL 3001 Ruler Foot
Runs against quilting rulers for smooth, guided free-motion lines.
Brother XL 3001 3 Strand Multi Cording Foot
Holds up to three cords for neat decorative cording.
Brother XL 3001 Multicord Foot 5 Hole
Guides up to five cords for decorative multi-cord stitching.
Brother XL 3001 Shuttle Hook
Replacement hook that forms the lockstitch with the bobbin thread.
Brother XL 3001 Oil 1 Ounce Bottle
Clean sewing-machine oil for regular lubrication and quieter running.
Brother XL 3001 4 x Red Sewing Machine Spool Pin Felts
Replacement red felts for spool pins on many Singer and other machines.